The Importance of Fire Blocking Techniques and Products In Construction

The last thing that homeowners want or deserve from their contractor is short cuts taken in their home improvement project.  When doing any renovation around the home from installing a new door between your garage and your home, as in the picture above, or adding a new room onto an existing structure, the homeowner’s safety, now and in the future, is of utmost importance.

The need for for stopping or blocking

One safety issue we have found in many house’s that we have worked on is the lack of fire stopping or fire blocking with in the walls and door jams of homes.  Even though building codes and regulations state that fire blocking materials are included in construction, it is an all too often short cut that less than professional contractors take.  Talk with any firefighter and they will agree that this is a huge mistake.  Proper installation of fire blocks and fire blocking materials within walls and doorways is a property and life saver.

People have been seriously injured or lost their lives because of the lack of simple fire stopping blocks.  Fire stopping blocks are a simple component used in framing homes that when done correctly can help decrease the speed at which fire ravages your home, giving your family more time to escape.  This building technique is not as common in older homes, thus leading to a total loss of many older homes.

Modern day home construction

In modern day construction horizontal double 2×4’s can be seen on top of vertical studs to create a wall blocking system.  This helps to seal in the cavity and separate it from the one next to it which in turn works to prevent the rapid spread of fire throughout your home.

Without properly installed fire stop, the framing in your home can act like many mini chimneys throughout the home.  In older homes it was common to be able to drop an item from the homes attic only to have it shoot out on the basement floor moments later.  With out a barrier between the floors, flames are sucked up through the walls, acting very much like a chimney.

It may be hard to believe but the use of a single solid piece of wood at the top and bottom of the wall in between the studs can significantly reduce how fast fire spreads throughout the home.  If a fire does occur within the wall, the top block will help stop the fire from shooting upwards and into the home’s attic. Fire blocking at the intersections of joists and walls as well as sideways between floor and ceiling joists can literally save your family.

Materials used for fire blocking

Another material that can be used in construction and during renovations is known as Fireblock foam insulation and fire barrier caulk. When a hole is created within the home it is important that it is filled.  Not only will it help to prevent drafts, it also helps to stall fires from sneaking between the walls. Fireblock products should always be used when contractors are installing door jams or have created holes.  Plumbers, electricians, heating contractors, and even general contractors should all be well versed in the use of Fireblock products.

Glen Miller the Home Doctor is a licensed general contractor servicing Livingston County and the surrounding areas.  Glen offers a wide range of services including home maintenance plans, age in place remodeling, kitchen and bathroom remodeling, finished basements, and hardwood floor refinishing.  More information can be found online at https://www.glenmillerthehomedoctor.com/.

Managed IT Services: Finding A Compatible IT Provider for Your Business

As you are interviewing providers to provide your business with managed IT services it is crucial that you know what you need and exactly what services you are looking for.  Below we will provide you with some tips you should keep in mind while you are interviewing companies to become your new managed IT services.

In business, no matter if you are growing or happy where you are currently at, your IT infrastructure is crucial.  Many small business owners try to manage their IT services without hiring an outside source.  However, as they grow, they find that their IT service needs become more than they can manage on their own.  This is where companies such as Creative Programs and Systems, CPS, can help.  Managed IT services leverage the use of technology to increase efficiency throughout your organization.

Managed IT providers, MSP, is a company that is an outsourced provider of set IT tasks for your business.   Many MSP providers are seen as your company’s “internal” IT team as most are available to provide services to you 24/7, after business hours may be considered emergency only.  A major benefit of MSP providers is that they become part of your company without the overhead and extra staff.

Important Features of Your Managed Services Provider

IT Support When You Need It – 24/7/365

One detail that many IT service contracts include is availability.  Although most MSP providers offer services round the clock it is common that services provided outside of what is agreed upon as normal business hours is done at an additional premium.  The point being that they are available when you need them.  Catastrophes don’t always occur during “regular” business hours.  It is important that even though your IT company isn’t open 24/7/365, they are available when and if you need them.

Backups and Data Recovery

It is crucial that your service provider has in place specific procedures for backups and data recovery.   Most companies don’t know the benefits of an IT provider until an actual catastrophe occurs.  When a data failure occurs, and you are required to restore your company information based on the backups that are in place is probably not the time to learn the company you hired is subpar.

Maintenance and Preemptive Support

Not only is the purpose of hiring an MSP about having support when a problem occurs, it is about being proactive and preventing issues before they occur.  IT support providers need to be able to not only monitor the existing IT infrastructure they should also derail potential problems before they occur.

Hire an MSP Provider That Understands Your Company

Every business is unique and therefore needs special attention paid to their unique needs.  Find a provider that wants to learn about your company in detail.  In order to provide your business with a successful IT solution and suggest strategies to grow your company they must understand your companies wants and needs.

Creative Programs and Systems, CPS, is an all-inclusive IT solutions company offering a variety of services including: managed IT services, IT consulting, residential computer services, custom programming, website design, iphone & android app development, and more.  More information can be found at https://cpsmi.com.

Planning for and Purchasing a Linear Accelerator

A lot of different aspects go into the purchasing procedure of equipment used throughout medical facilities, health clinics, and hospitals.  Unlike other business, hospitals are not only looking for equipment that is affordable, they are searching for equipment that provides clients with effective treatment, precise results, and quality care.  In order to do so, the purchasing team of the facility must work in conjunction with physicians and critical care staff to plan for new equipment purchases.

Planning & Understanding Your Clinical Goals

Critical personnel must understand the clinical goals of the clients.  Right from the start it is important that all facility members involved recognize the types of patients that will be treated, and the technology needed to deliver top notch radiation therapy to them.  Is important that you are fully automated and digital?  Does the facility need to consider EPID, Electronic Portal Imaging Device?  Will images of tumors be taken on a daily or less frequently?  If you will be then an IGRT solution must be selected.  It is also important to know how the tumor will be defined for treatment.  Are you going to need a multi-leaf collimator with leaves (MLC)?  Answering these questions will help your facility narrow down your exact need and the piece of equipment that will fill these needs.

Another crucial element in planning for a new piece of equipment, especially one as large as a linear accelerator, CT scanner, or other radiotherapy equipment is the location in which it will be installed.  In new construction you will have to consider the machines that are to be places now as well as technology that will be used in the future.  It will be crucial that the building has room for expansion for further equipment purchases as well as the technology appropriate for today’s need.  When renovating an existing space within the facility it is important to consider all of the constraints present such as shielding.

Having an established timetable for any project, especially the installation of LINAC systems, is the only way to successfully manage a successful health care facility when the normal flow could be disrupted.  Of course, it also helps prevent common sense issues such as having a space that is ready for equipment when it is delivered to be installed, set up, programmed, and ready for hands on training.  What good is a piece of equipment it is sitting in the hallway unable to be used?  It is important for facilities and personnel to establish a timetable for each milestone along the way, including a completion date.  There are many moving elements, including a number of experts, when installing a large scaled piece of equipment.  To prevent IT specialists from arriving before the equipment is ready for them to complete software installation and such, a timeline is necessary.

Once a clinical goal and time table have been set, now comes the time to create a budget for the acquisition of your new equipment.  Once a budget is set you will know if you should look into new, refurbished, or used equipment.  Quality refurbished linear accelerators and reconditioned CT scanners are ideal when working within a budget.  Prices vary for a number of reasons including: the age of the equipment, features, technology, and manufacturer.  When budgeting for large scaled equipment make sure to allocate for additional products and services that will be needed to use them successfully.  Radiation therapy includes large scaled equipment such as linear accelerators but also patient positioning devices and the such.  It is just as important to budget for the extras as it is the initial piece of equipment.

As an independent LINAC service company, Acceletronics is dedicated to delivering the best equipment performance and services for linear accelerators and CT scanners across all major brands and models, as well as new and refurbished LINAC systems for sale.  More information can be found online at https://www.acceletronics.com/.

Recovery After Lasik: What to Expect

LASIK is a common surgical procedure that is performed everyday throughout the United States.  The biggest concern that most patients have surrounds recovery.  It is important to note that although the surgery last only a few minutes per eye, the long-term recovery process, complete healing, can take upwards of six months.  Here are some common side effects and how you can relieve them.

Overall Discomfort and Minor Pain

Most LASIK patients describe a certain level of discomfort during and after laser vision surgery.  The most common sensations are light sensitivity, burning, or ripping.  Some patients say they barely notice these symptoms while others find them to be quite bothersome.  Symptoms can vary a great deal between what LASIK procedures and technique was used.  This minor pain and overall discomfort should dissipate in about two to four hours after the surgery.

Redness

Redness is a normal side effect of laser vision surgery and recovery.  Some patients experience dark red spots in the whites of their eyes for a couple of days after their surgery.  These spots are very similar to bruising and can take weeks to completely disappear.

Dry Eyes

One of the most common symptoms after LASIK is dry eyes.  More than fifty percent of patients express their need for eye drops after surgery.  Surgeons will recommend you purchase eye drops before the surgery in addition to the prescription eye drops that are prescribed to prevent infection and inflammation.

After the procedure you will be required to meet with your surgeon the next day for a post-operative appointment.  During this appointment you will have your vision checked and the ophthalmologist will check to make sure that your corneas are healing.  This is the time to address any symptoms you are experiencing with your doctor.  You will have several appointments throughout the healing process to verify that they process is occurring properly.  The intervals for these appointments will be one month, three months, and six months.  At the sixth month visit your eyes should be completely healed and your vision stabilized.

After surgery, to avoid complications, there are a number of activities that should be avoided including from wearing make-up to avoiding strenuous activities.  It is also important to avoid getting soap and water in your eye and you should avoid swimming or any activity in which you submerse your head in water.   Computer use should also be avoided or used cautiously.

Rohr Eye & Laser Center offers the most advanced technology available to suit your lifestyle and visual needs.  As a leader in laser vision correction and cataract surgery, our goal is to help you achieve the best vision possible without glasses or contact lenses.  More information can be found online at https://michiganlasik.com.

 

 

Improving the Water Quality in Your Home

There are a number of reasons that the water in your home could be discolored or taste funny.  Many of the causes of peculiar tasting, smelly, ill colored water comes from where the water is coming from on your property or the city.  There are steps that homeowners can take to improve the quality of drinking water no matter the source of the water.  From city water to well water Reynolds Water Conditioning company has a solution for your water.

City Water

When your water comes from a city source you can almost guarantee that any problems occurring with your water are derived from your property.  Some areas in the state of Michigan however are an exception to this such as Flint.  The municipal water source in Flint is contaminated with lead.  In this situation the problem with the water does not come directly from the property and therefore is difficult for you to treat within your home.

One of the things that you can do if you have issues with your city water is to evaluate the pipes in your home.  If there are changes that you can notice within the water such as color, taste, and changes to the water pressure this almost certainly means that there is an issue in your pipes.  Corrosion is known to cause partial blockages decreasing water pressure and adding a presence of ill tasting and smelling elements to the water supply.  If interior pipes are not found to be the source of your issue, then it is a good idea to check the exterior pipes of your home to check for leaks.  In no case do we recommend tackling issues with your plumbing alone.  It is always best to work with a professional.

Well Water

The process of determining where the issues lie within your well water is much simpler than it often is with city water.  The first step professionals will take is to test your homes water to determine what contaminants are present.  If the water is clear, then further investigation will need to be done with the infrastructure.  However, more often than not the problem will be a chemical imbalance in the water.  If the water balance is correct the first places to check are with the well pump and casing.   Leaks and improper seals can lead to contaminated water and sediment.

Water Filtration

Whether you have city or well water, water filtration systems can be installed to remove pollutants from your homes water and make your water taste better.  Water filtration units can be installed as point of use or point of entry.  The professionals at Reynolds can help you determine what type of system will work the best for the water quality in your home.

Whole-House Water Filters

A whole house water filtration system is in place to filter all of the water that is used within your home.  This includes the water you shower with, the water that flows through your shower, all of the water that exists a faucet is filtered when a whole house water filter is installed.  Water quality professionals install whole-house filters at the main water supply.

Point-of Entry Filters

When your water is on point most of the time but occasionally has an odor, weird color, or taste a point of entry water filter system installed on the kitchens water supply can improve the quality of the water you use for drinking and cooking.

Reverse Osmosis Systems

RO systems work to improve the quality of your water by passing it through multiple systems that work to eliminate bacteria, sediment, and other pollutants within the water.  This leaves the natural minerals in water and oxygen behind leaving great tasting water.  Reverse osmosis water systems require users to replace filters on a regular basis to keep the water quality at peak levels.

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.

Installment One – The Process Of Treating Cancer Using Radiation

What is radiation therapy anyway?

Radiation therapy is one of the most common ways to treat cancer.  Depending on the type and nature of cancer being treated will depend on what method radiation is delivered to your tumor.  Most commonly, a linear accelerator is used to deliver external beam therapy.  LINAC machines deliver radiation directly to your tumor, externally.

How does radiation therapy work?

When radiation is delivered using a linear accelerator it is delivered to both cancerous cells and healthy cells. Radiation affects cancerous cells more than healthy cells.  The highest possible dose of radiation is delivered to kill off the cancerous cells.  Smaller doses can be delivered when the aim of treatment is to reduce the size of the cancerous tumor and relieve the symptoms.

Who plans and delivers your treatment?

Cancer oncologists will create a plan of treatment for patients.  When the treatment that is planned requires radiation, a radiation oncologist will oversee the treatment and delivery of radiation.  A team of cancer experts including nurses, specialists, counselors, dieticians, and assistants will help guide you throughout your treatment.

How is your treatment planned?

All cancer treatments are designed with the patient, the type of, and size of cancer.  Radiation therapy is no different.  Before radiation treatment is given patients will visit the facility to go over the plan of treatment that has been designed specifically for them.  Radiation oncologists and radiation therapists will develop a plan based on x-rays and scans from simulators.  Marks are then placed in strategic locations to pin point the areas to be treated.  These marks will be placed each and every visit as the cancerous tumor changes.  For cancers that are in the head, a guidance mask is created from a mold of the patients heads and is used to stabilize and pin point treatment due to the sensitivity of the area.

Does radiation therapy require hospitalization?

Radiation therapy is most often done on an outpatient basis however in some situations your radiation oncologist may recommend that you be admitted if they think it would enhance the success of your treatment.  This is rare and usually does not occur as long as you are able to travel to and from the hospital for treatment.

What tests are performed in conjunction with radiation therapy?

Over the course of radiation treatment your oncologist will want to perform a number of follow up scans and x-rays to make sure the cancer is reacting to the radiation as expected.  Occasionally additional lab work is required and is considered normal and nothing to worry about.

In our next installment on radiation therapy we will look deeper into what you can and cannot do during treatment and ways to combat side effects and more.

Radparts is the world’s largest independent distributor of OEM replacement parts for Linear Accelerators and Radiation Oncology equipment.  Radparts provides high quality, user friendly, low cost parts support for linear accelerators and radiation equipment. More information can be found at https://www.radparts.com/.

 

 

What Will I Have to Pay for Medigap Coverage?

For many Medicare beneficiaries determining how much they have to pay out of pocket for Medicare and Medigap can be quite tricky.  It’s figuring out what essential coverage, Medicare Parts A, B, and D, is going to cost, only to find out that these three plans don’t fully cover you.  Not only will additional Medigap coverage have a monthly premium, you will also need to determine how much the deductible and co-insurance will run.  With most Medigap plans, beneficiaries can expect to be responsible for up to 20% of their outpatient medical expenses.  It is important when planning for retirement that these estimated costs are considered so that you can be financially prepared.

Choosing a Medigap Plan

Medicare’s standardized supplemental insurance plans date back to 1990.  Since then it has been simpler for Medicare recipients to compare the costs of these plans between providers which is clearly important for a number of reasons.  Of the ten standard plans available there are two high premium plans that have more complete coverage then any of the other eight, Medigap Plans F and G.  The benefit of choosing one of these two plans is that although the monthly premium is higher there is little to no out of pocket needs.

Participants that want a lower monthly premium and are okay with sharing the cost of treatment as they go along should consider Medigap Plans K and N.  These plans both offer lower monthly premiums however offer fewer benefits.  Participants will share more of the expenses as needed along the way.

There are a number of factors that go into determining your monthly premium.  If you are enrolled in Medigap within your open enrollment period, you will not pay more based on pre-existing conditions however other factors do play a role.  These include age, gender, tobacco usage, the policy you choose, when enrollment takes place, and discounts for more than one enrollee in a household.  This will depend strictly on the carrier who is allowed to set rules for these discounts.  A Medigap broker will help you determine which carrier is offering you the most coverage at the best rate.

Where you are located is another factor in determining the amount you will pay for Medigap plans.  From state to state, zip code to zip code, Medicare supplemental plans premiums vary a great deal.  Consider this: Medigap Plan F in Fort Worth, Texas can run between $149 – $180 per month for a non-tobacco using 65-year-old male whereas the same coverage in Los Angeles, California will run between $169 – $190 per month.  Medigap in Florida is even costlier as this same person would most likely pay between $275 – $336 per month. This may just be one of the many reasons that many Medicare enrollees in FL choose a Medicare Advantage Plan instead.

It is also crucial to consider healthcare related expenses that are not covered through Medicare or Medigap what-so ever.  Medicare does not help pay for expenses related to long-term care which is always a shock to seniors.  It also limits the type of care and equipment it will pay for often have strict stipulations in place for home health care needs and medical equipment.  Often in order for these items to be covered a doctor must be in charge of prescribe them and proving that they are necessary. Certain dental needs, vision care, and hearing costs may also not be covered as well.

The experts at eMedigap Plans, powered by Omega, have all the answers you are looking for when it comes to your Medigap Supplemental Insurance needs.  More information can be found at http://emedigap-plans.com.

Medigap vs Medicare Supplemental Insurance Plans

What’s the difference between Medigap and Medicare Supplemental Insurance?

Is Medigap Plan F the same as Medicare Supplemental Insurance Plan F?

What does each of these plans offer me in terms of coverage?

These are just a few of the many questions that enrollees ask when first becoming eligible for Medicare.  Thankfully, we have all the answers you will need!  There are absolutely NO differences between Medigap and Medicare Supplemental Insurance Plans, they are in fact synonymous for the exact same type of health insurance.  Each of these ten standardized plans are offered by private insurance carriers and were put in place to help cover some of the out of pocket expenses that are not covered under Medicare Part A and B.

Medicare Part A – Hospital Insurance

Medicare Part B – Medical Insurance

Medigap insurance plans work in conjunction with Medicare Part A and B to help with out-of-pocket expenses such as deductibles, copayments, and co-insurance amounts.  Medicare Part A and Part B pay its share of Medicare approved expenses that patients receive.  In order to enroll in Medigap you must be enrolled in both Medicare Part A and Part B.

Standard Benefits

One of the benefits that come along with Medigap is knowing that no matter where you purchase your insurance plan from it provides the same coverage.  Medigap Plans are regulated under both federal and state laws in order to protect enrollees.  Each policy must be identified as a Medicare Supplemental Insurance Plan which is identified by a letter.

Cost and Availability

No matter what insurance company sells you Medigap each standard plan of the same letter offers the same basic benefits.  Plan premiums can and often do vary between providers.  The best option for enrollees is to first decide what plan works best for your health care needs.  After this has been decided, with he help of a Medigap agent, they can help you find the best rate where you reside.  When you are deciding this, you should consider:

  • Not every insurance company allowed to provide Medigap will offer each of the ten standard plans. You will want to make sure the plan that you want is available through the carrier.
  • The amount you will pay, the cost or premium, will vary amongst insurers even though they are all offering the exact same coverage.

Applying

Open enrollment for both Medicare Part A, Part B, Part D, and Medigap (Medicare Supplemental Insurance Plans) begins on the first day of the month in which they turn 65.  This period will last for 6 months.  This allows you to apply for coverage without worry that you will be turned down during medical underwriting.

The experts at eMedicare Supplemental Insurance, powered by Omega, have all the answers you are looking for when it comes to your Medicare Supplemental Insurance needs.  More information can be found at http://emedicare-supplemental-insurance.com/.

2019 Kitchen and Bathroom Trends That Will Stand the Test of Time

It is not likely that you will renovate the kitchen and bathrooms in your home more than once.   Remodeling these spaces takes quite an effort from both the homeowner and contractor.  It’s true that the heavy lifting all comes down to who you hire however behind the scenes you are the one that is executing the rhythm of the entire project.  It is crucial that you, as the homeowner, knows what elements are crucial to have in your new kitchen and bathroom spaces.  This will not only make it enjoyable for you to use as you live there but also more desirable to buyers when it’s time to sell.

There are a number of elements in home improvement that are used to create kitchen and bathroom spaces that are not only luxurious but also functional.  Below are some of the trends we expect to see really take hold in 2019.

No More White… Color! Color! Color!

White kitchens are a thing of the past.  Not only are white kitchens difficult to keep clean, they are visually quite boring.  Fans of bright, bold, vivid colors will be thrilled to bring it to their kitchen and bathroom spaces.  Stark white, boring beige, and neutrals are being replace with brave, daring colors.  Some considerations to help bring this trend to life include:

  • Colored appliances, especially large stoves
  • Painted cabinets
  • Matte black over gray
  • Pops of colors found in shower doors and enclosures

Technology Throughout

The addition of technology is a trend that continues to grow throughout the world of home improvement.  If you don’t take technology into consideration when envisioning your new kitchen or bathroom space, then your renovation will fall short.  Adding technology into kitchens and bathroom spaces can be simple including:

  • Appliances enabled with Wi-Fi – Think ordering your groceries from your refrigerator! Think soap dispenser that can reorder soap when they run out! Think switching music choices in the shower!
  • Integrating Alexa
  • Programmable lighting
  • Smart appliances and gadgets

Unusual and Unique

There aren’t a lot of ways to really explain this concept in kitchen and bathroom remodeling other than to remind homeowners to texture and elements that make people want to know more.  Materials you would not expect used in unique ways including:

  • Industrial metal shelving
  • Big sinks with intricate metallic detailing
  • The use of large, geometric shapes
  • Shapely faucets

As a full-service home improvement contractor servicing all Southeast Michigan, Kearns Brothers, Inc. offers clients a wide range of services to meet their construction needs including: roofing, siding, window, masonry, chimneys, gutters, and insulation services.  More information can be found at www.kearnsbrothers.com.

The Best Choice in Flooring for Your Home

The type of flooring you invest in for your home depends on your wants, needs, and above all your budget.  There are some things you will want to keep in mind when choosing flooring for your home.  Carpet is a perfect addition to bedrooms where you want cozy, comfortable flooring under your feet however, carpet in a bathroom doesn’t make any sense.

As a home improvement specialist, it is important to guide homeowners looking to redo their flooring in options that are available to them.

Hardwood – Natural

Hardwood has always been a popular option for homeowners throughout history.  Natural hardwood is a popular high-end material in flooring. Hardwood flooring is a classic option that homeowners often choose for its durability and longevity.  Hardwood is made to be used for years and years.  It can be stripped and refinished, creating a brand-new floor for your family to enjoy.  It is a great option for homeowners looking to increase the value of their home.

Hardwood – Engineered

Another option similar to hardwood by less expensive is engineered hardwood floors.  Similar to natural hardwood, engineered hardwood can be sanded down and refinished which makes it a good option not only for the homeowner but for future buyers.  They are also not as vulnerable as hardwood when it comes to expansion and contraction.  Once the floor is in place there is less chance for buckling.

The best rooms in your house for hardwood, either natural or engineered are living rooms, dining rooms and low traffic rooms such as a guest room.  Hardwood is noisier than other options in flooring.  Many homeowners combat this issue with the use of throw rugs.

 Tile

Tile is a wonderful option for homes where moisture and humidity issues are common.  Many homes in southern states will use ceramic tiles throughout the entire home for this reason.  Tile can be a bit costlier to install than other flooring but the savings from water protection and its overall durability make the extra expense worth it.  Tile is not only available in a number of colors it also comes in a variety of shapes, textures, and looks.  Tile is extremely versatile from mirroring the look of wood or a fancy mosaic you can rest assured as a homeowner that you are purchasing durable flooring when you have tile installed.

The best rooms in your home to install tile are the kitchen, bathroom, laundry room, and foyer spaces.  It cleans up well and can handle high levels of moisture.  It is also a great option to use throughout the home if you pair it with throw rugs.

Carpet

Carpeting is a natural choice for many homeowners looking to redo the flooring in their home. It is relatively inexpensive and easily provides wall-to-wall coverage without too much preparation on the homeowner’s part. Carpet can be purchased with a protective coating that allows it to repel stains which is good for households that include kids both two and four legged.  Another benefit of carpet is the vast number of options to choose from.

The best rooms in your home to install carpet are bedrooms and family rooms.  Carpet is appealing because it emits the feeling of comfort and warmth.  To create an even cozier feel with carpet choose a top-quality pad to go under it.  The padding that you choose can even help increase the longevity of your carpet, allowing it to age gracefully along with your home and family.

One of the benefits of improving your home with new flooring is that you have a lot of choices.  The selection doesn’t need to be the same throughout.  Homeowners can easily use a combination of flooring materials to create a space that best works for them.  As with any home renovation it is best to meet with a home improvement professional to achieve the results you are looking for.

JFC Remodeling is a full-service licensed contractor out of Howell, Michigan.  Specializing in kitchen and bathroom renovations, flooring upgrades, and home remodeling services.  More information can be found online at https://jfcremodeling.com/.