Author: admin

Basic Water Softener Maintenance

Maintenance and service on water softeners is pretty basic when it comes to the world of appliance upkeep.  The exception to this, however, is the initial installation of the water softener.  Determining the water hardness level, regeneration timing parameters, salt to use, and when to refill the salt so the softener can perform properly can be a bit tricky.  Proper water softener set up can make long term maintenance easier and the softener perform more efficiently and last longer.  

Ongoing Maintenance – Tips for Residential Water Softeners

Avoid Salt Bridges

Salt bridges occur when an empty space is created in the brine tank between the water and the salt.  This prevents the salt from dissolving in the water which is how brine is made.  Without brine the resin beads that soften the water are unable to do their job. 

The most common cause of bridges are high humidity, temperature changes, or using the wrong type of salt.  Salt bridges make it appear that the salt in your water softener tank is full.  Your water, however, will be hard because the salt is not dissolving to make brine.  To remove a salt bridge, use a long handle and slowly push the top of the salt downward.  A little bit of pressure is all that is needed to break up the solidified salt.

Prevent Salt Mushing

Salt mushing is more serious than salt bridges.  This occurs when the salt dissolves and then recrystallizes to form a sludge on the bottom or the brine tank.  This thick layer of sludge keeps the softener from cycling properly during the regeneration process.  Hard water remains and a serious blockage is created in the tank.  If you attempt to remove a salt bridge and it does not break up, salt mushing is probably the cause of your hard water problem. The only way to fix the issue of salt mushing is to drain the softener of all water, remove the old salt and sludge, and replace it with fresh salt. 

To prevent both salt bridges and salt mushing it is important to use high quality salt products as they greatly reduce the potential for problems.  Also, it is important not to overfill the brine tank with salt.  Keeping it only half-fill will prevent older salt from sticking to the walls of the softener tanks.  Preventing humidity around the water softener can also help. An environment with high humidity can lead to condensation in the brine tank which will cause salt to bond together.

Water Softener Salt

In choosing salt to use in your water softener you will be able to choose from rock, solar, and evaporated salt.  Rock salt is the cheapest however contains the highest level of insoluble minerals.  When this occurs, the result is a muddy tank which decreases the softening efficiency and leaves impurities in your water.  Solar salt is more soluble than rock salt.  Solar salt is obtained through the evaporation of sea water and is found in crystal and pellet form.  The best option for salt to use in your softener is evaporated salt.  This is obtained through the combination of evaporation and mining.  Solar salt is 99.99% sodium chloride and is the purest form of salt.

Salt with high levels of purity leave less residue thus lower the likelihood of salt bridging and mushing.  Purer salt results in less maintenance and high-quality salt in pellet form helps to eliminate bridging issues. Water softener salt delivery allows you to order top quality salt brand products that address specific issues such as high concentrations of iron, rust stains, and salt free alternatives like potassium chloride. 

Resin Bed Cleaning

Resin beads are routinely recharged by salt, but this doesn’t mean that the resin bed shouldn’t be flushed every few months with a cleaner designed for water softeners every few months to keep it in top shape.  Water softening units can become polluted with iron, silt, metals, and a variety of different organic compounds which decrease your softeners efficiency.  The process to reduce the ineffective resin is fairly simple.  You will pour the manufacturers recommended amount of cleaner down the brine well and manually regenerate the water softener.  The cleaner will be discharged during the normal flushing process during the softening cycle.  This action cleans the resin and helps the absorbency of calcium and magnesium.

Clean the Venturi Valve

The venturi and nozzle work to create suction that moves brine from the brine tank into the resin tank during regeneration.  Sometimes this valve can become plugged up with sand, sediment, or dirt.  A clean valve is imperative for water softening to occur properly.  This can be accomplished by unscrewing the cover of the valve, removing internal parts, and cleaning them all with soap and water.  Completing this process twice a year will help keep the process running smoothly and more efficiently. 

Periodic maintenance, regular upkeep, and monthly checkups all prevent major incidents from compiling and affecting the quality of the water running through your home.  Hard water leads to major expenses, like new appliances, plumbing issues, and more, when left untreated. 

The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more.  More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.



Being a Canidate For LASIK

LASIK is a type of refractive eye surgery that eliminates dependency on corrective lenses.  It is, however, not the right decision for everyone.  It is important to determine if you are a good candidate for LASIK and that you weigh the decision to have the procedure before scheduling your surgery.  Are you tired of wearing glasses and contacts?  Read on to see if you are a candidate for laser vision correction surgery.

Most LASIK patients will achieve 20/25 vision or better after LASIK eye surgery.  This is appropriate vision for most activities; eventually however, some LASIK candidates will need glasses for reading or driving at night. 

The track record for LASIK surgery is good.  There are a few rare complications that result in vision loss.  In fact, most people are satisfied with the results of their procedure.  Common side effects of the surgery are dry eye and temporal visual disturbance but often clear up in a few weeks or a month.  They are rarely long-term and don’t require additional intervention.  Of course, the final results will depend on your refractive error. Candidates with mild nearsightedness have better success overall with refractive surgery while candidates with a high degree of nearsightedness or farsightedness with astigmatism have less predictable results overall. 

There are multiple differences in laser refractive surgery although LASIK is the generic term used for all of them.  Images are focused on the retina in the back of your eye.  When your vision is not perfect the images focus elsewhere and result in blurred vision. 

Nearsightedness results in objects far away to appear blurry whereas nearby objects are clearer.  The eyeball is normally longer or the cornea curves sharply which doesn’t allow the light rays to focus at the front of the retina and then blur distant objects.  Farsightedness on the other hand is where close objects are blurry but objects in the distance can be seen clearly.  This occurs because the eyeball is short or the cornea is flat, light then focuses behind the retina.  Astigmatisms cause overall blurry vision, the cornea curves or flattens unevenly.

Traditional methods of blurry vision are corrected by the bending of light rays with contacts or glasses.  Reshaping the cornea during LASIK provides the necessary refraction for vision correction.  Before surgery the surgeon will take detailed measurements of your eye.  They will then use a specialized cutting laser to alter the curve of the cornea.  The pulse of the laser beam removes a tiny bit of corneal tissue which allows your eye surgeon to flatten or steepen the curve of the cornea.  The surgeon will create a flap in the cornea and then raise it up before the cornea is reshaped. 

Rohr Eye & Laser Center offers the most advanced technology available to suit your lifestyle and visual needs.  As a leader in laser vision correction and cataract surgery, our goal is to help you achieve the best vision possible without glasses or contact lenses.  More information can be found online at https://michiganlasik.com.



Improving LINAC Service Response Time

Linear accelerators and complex support devices are at the heart of today’s radiation oncology.  As technology continues to advance and change the way in which LINAC systems treat cancerous tumors, it becomes increasingly difficult to manage the way in which equipment maintenance, malfunction, and breakdowns are managed.  The strategies to manage quality, mitigate risk and analyze failures have improved to adjust to the changing needs of radiation oncology equipment. 

Manufacturers of oncology equipment add guidelines to ensure successful management of equipment maintenance including system monitoring and cyclical measurements of key functions verse pre-specified tolerances.  This information was previously documented by hand whereas in today’s environment data can be recorded, distributed company-wide, and stored electronically. IT plays an integral role in storing and managing the data which can then be integrated into the everyday workflow in the radiation oncology department.    

Work to cultivate IT clinical management solutions in the radiation department is often done in house working in collaboration with equipment vendors.  This process is an essential component in quality management of radiation oncology equipment services. 

Service and support of linear accelerators are a key element in quality management in the radiation oncology department.  In most facilities, radiation therapists will report all technical problems with the LINAC to a clinical medical physicist who then reports the events of the machine’s failure to the vendor’s dispatch center to schedule support.  When this call is made the therapist or physicist reporting the LINAC failure will provide the identification of the linear accelerator, the location of the machine, and a detailed report of the problem including what issues led up to the failure..

Depending on where the machine is located, the vendors dispatch center will provide information to equipment engineers at their technical support help desk.  Together the user and engineers will attempt to diagnosis the issue at hand and coordinate actions for repair. 

Facilities looking to improve the efficiency of support and service to linear accelerators when failure occurs can implement key changes in the overall process.  These procedure modifications include:

  • Lessen the number of steps involved in reporting the LINAC failure to the vendor’s support team.
  • Reduce duplication and surplus in the diffusion of information related to the linear accelerators’ failure.
  • Record events electronically for improvement and evaluation of delivering services related to LINAC maintenance and repairs.
  • Utilize remote support from vendor approved engineers that are familiar with the installed system and its maintenance and service history.

As an independent LINAC service company, Acceletronics is dedicated to delivering the best equipment performance and services for linear accelerators and CT scanners across all major brands and models, as well as new and refurbished LINAC systems for sale.  More information can be found online at https://www.acceletronics.com/.

Techniques Used in Radiation Therapy


The leading cause of death globally remains to be cancer. The word cancer is often used when a person describes how a loved family or friend dies. The first cancer treatments appreciated were introduced in 1895 after the discovery of Xrays. Cancer treatment has continued to progress at an increasing rate each year with new technology and growth in knowledge on the subject. There are many treatment options to be considered such as radiation therapy, surgery, chemotherapy, immunotherapy and hormonal therapy.

Radiation therapy continues to be one of the most important components of treatments available since it’s estimated 50% of all cancer patients receive radiation therapy during their sickness. The reason for such a high amount of uses for this type of treatment is the efficiency to target the cancer cells with beams of radiation produced by radiation equipment called a linear accelerator or LINAC. The high energy x ray beams destroy the cancer cells while preventing radiation damage from the healthy cells. Radiation therapy can be delivered in two different ways, the first is through External beam radiation. This type is the most common and is used from the outside of a patient’s body by aiming the radiation beams at the location of tumor. The second type of delivery is Internal radiation or also called brachytherapy. Internal radiation is done through the inside of the body by radioactive sources such as catheters or seeds directly into the tumor.

Fractionation

Radiation dose fractionation is radiotherapy delivered in a fractionated form. This type of therapy generally increases the survival of normal tissues and cells over the cancer cells. Normal cells multiply more slowly compared to the rapid increasing cancer cells which allows the healthy cells more time to heal before they replicate.

3D Conformal Radiotherapy

New technology has allowed older 2D radiation therapy that previously used rectangular fields based on plain X-ray imaging to be replaced with 3D radiation therapy based on CT imaging. This replacement allows for a more accurate target of the tumor as well as precise location of other normal organ structures for the most efficient beam placement and shielding to occur.

Intensity Modulated Radiation Therapy (IMRT)

Oncologists can create irregular-shaped radiation doses that take shape of the tumor while also having the ability to avoid other organs with IMRT technology. This process is all possible due to two factors which are inverse planning software and also computer controlled intensity modulation of multiple radiation beams during the process.

Image-guided Radiotherapy

The possibility to miss a tumor due to organ movement or the variations needed for each patient’s setup it becomes even more important for treatment options to be more precise than ever before. When critical tissue and organs are close to the tumor, a slight positional error could lead to radiation damage to the healthy cells. IRGT is created and utilized to allow detection of these such errors by the information taken through pre-radiotherapy imaging which can be used for corrections.

Stereotactic body radiation therapy (SBRT)

Another type of treatment that is possible today due to advances in newer technology is SBRT. This treatment delivers very high separate doses of radiation over only a few treatment fractions to destroy small tumors anywhere in the body of patient. The side effects of this however, tissues that are close in proximity to the tumor is likely to get damaged due to the high radiation dose. Since the amount of normal tissue effected is small in the high does region, toxicity is less.

Radparts is the world’s largest independent distributor of OEM replacement parts for Linear Accelerators and Radiation Oncology equipment.  Radparts provides high quality, user friendly, low cost parts and support for linear accelerators and radiation equipment. More information can be found at https://www.radparts.com/.



Upgrading Your Floors? Breaking Down the 5 Most Popular Flooring Choices

When it comes to renovating your home, one of the biggest decisions you’ll make is what type of flooring to use. For most homeowners this is not an easy choice. Balancing out the pros and cons of each flooring type, considering not only the look of it, but also its practicality can be a daunting task. What is the comfort level? Will it stand up to pets and kids? How will you maintain it? And, does it fit your budget?

Your homes location and the particular room that needs resurfacing are other factors. Homes located near the beach tend to utilize tile flooring for easier clean-up of sand. Colder climates prefer the warmth of carpet, cork, or hardwood flooring with area rugs but they’re not suggested options for bathrooms or mudrooms; tile, vinyl or linoleum are better choices.

These are questions the professionals at JFC Remodeling can help you assess. With over 30 years experience, Jason Foldenauer and his team are licensed and insured contractors ready to assist you. Compare options available below and contact them for a free consultation. 810-923-1123

Pros and Cons of Popular Flooring Options

Hardwood:

Pros: Hardwood is durable and attractive. Choose various types of hardwood and the stain color. It can be resanded and refinished several time and can last the lifetime of the house if it doesn’t get too wet.

Cons: Hardwood requires regular maintenance and can warp with moisture. It needs to be refinished periodically. It also needs a subfloor installed. It can be damaged by too much moisture and easily scratched by pets’ nails.

Cost: On average $3 to $14 per square foot for materials.

Engineered Hardwood

Pros: Less expensive than hardwood, engineered hardwood comes prefinished and is easier to install. It works better with heated floors and is less susceptible to moisture damage. Doesn’t require a subfloor.

Cons: Can only be refinished a few times.

Cost: On average $3 to $13 per square foot for materials.

Carpet:

Pros: Softer and warmer to walk on than most other materials. It’s often less expensive than other flooring.

Cons: Can be easily stained by spills and wears out more quickly than other flooring. Can be a problem for people with allergies.

Costs: On average $1 to $11 per square foot, depending upon material.

Tile:

Pros: Extremely durable, will last longer than the house, easy to clean, comes in a huge variety of styles, sizes and colors. You can even buy porcelain tile that looks like wood.

Cons: Not very comfortable to walk on and can be cold. Grout is not easy to clean, surface is hard to stand on for long periods, and anything dropped on tile breaks. Tile requires expert installation, though it can be done by a skilled DIY homeowner.

Cost: On average $1 to $10 per square foot for materials.  

Laminate:

Pros: Inexpensive, can be installed over existing floors, comes prefinished. It can also be a DIY project. It’s softer on feet than tile if it is installed with proper backing.

Cons: Can’t be refinished, can be destroyed by flooding or damaged by moisture.

Cost: On average 69 cents to $4.50 per square foot for materials.

JFC Remodeling is a full-service licensed contractor out of Howell, Michigan.  Specializing in kitchen and bathroom renovations, flooring upgrades, and home remodelingservices.  More information can be found online at https://jfcremodeling.com/.



Starting Up Your Pool After New or Refinished Plaster Is Done


The start up procedure for a pool that has new plaster or had the plaster resurfaced is very important to guarantee that the plaster cures properly. Having a professional plaster company or builder to handle this process is the best option but understanding the process and being involved with the maintenance of your pool with benefit your pool’s over all life. Before making any start up tasks on your own, be sure to ask your plaster company for recommendations and be sure that anything done on your part will not void the warranty provided by them.

Steps to Follow During Set Up

  1. Fill up the pool as fast as possible without stopping at any time. The use of additional hoses to speed the process can be beneficial. If the pool is only partially filled and process is stopped, a line will be left from the water level and be very difficult to be removed without doing an acid bath. The water from the hose should not spray directly onto the fresh plaster as well.
  2. Once pool is full, add a dose of sequestrant for startup. The use of sequestrant is to act as an aid when locating Iron and other metals that are hard to detect otherwise. These metals can cause staining on new plaster that are difficult to remove so by using this product it acts as a precaution for this.
  3. Do not operate the heater for a 2-week period after filling the pool. It is typical for new plastered pool to create a lot of plaster dust that can cause clogs in tubing of the heater. By passing the heater will avoid the risk of damage to it during the 2 weeks start up.
  4. Refrain from swimming in the pool until the water is properly balanced. After the pool is fully filled with water, run tests using test kits to verify the water is clean and non-acidic.
  5. It is best to not use any automatic cleaning system during the first 2 weeks. Proper cleaning by brushing the entire pool twice a day during the first week. After the first week switching to a once a day routine for the remainder of one month should be done on the whole plaster surface. Starting at the top of the walls and working towards the bottom starting from shallow end to the deeper. This process will help with removing any loose plaster dusts left behind from the install.

The above directions for new plaster or resurfaced plaster start up are basic and generic instructions given for any type of pool however there are 3 specific start up methods a builder may use that has separate rules to follow. These methods include; acid, traditional, or biocarbonite. Be sure to ask your builder or pool plaster company for guidance since variations of steps can be done and the professionals are always the best advice to follow for your own specific pool and conditions.

Pound Pool Plastering offers several options when it comes to servicing your pool including plaster, caulk, tiling, cement decks, plumbing, and coping in both commercial and residential settings.  More information can be found at https://www.pound-pool-plastering.com/.



Major Benefits to Choosing Aluminum Fencing


Aesthetics matter when it comes to your home’s curb appeal.  It is important that the entrance to your home accurately showcases your house as well as the surrounding landscape. Aluminum fencing can help make your house stand out from the rest. 

Just think about the last time you were driving around and came across a beautiful home that was surrounded by a dilapidated, dated fence.  It probably turned you off and had you no longer wondering what lay on the inside. If you are house hunting it may lead you to believe that the owner doesn’t take care of what they own, which may mean the home has some hidden defect. 

Appeal from the Curb

When selling your home, curb appeal is more important than most any other feature on your home.  It provides buyers the confident they want to ensure the homes value and worthiness.  Little details, such as the type and condition of fencing play a huge part in creating curb appeal.  The installation of an aluminum fence and driveway gate promote qualities all buyers are looking for, sturdiness, dependability, and elegance. It shows the property has been in good hands. 

Budget Friendly

The ordering and installation of an aluminum driveway gate and perimeter fence has been made simpler because of online fence manufacturers, the ability to order from the comfort of your own home and install with tools you likely have sitting around the house already.  Online customer service also helps make ordering and installation simpler as well as the fact that all aluminum fencing from iFenceUSA comes with detailed installation instructions and diagrams.

The best part is that these well-made, beautiful aluminum fences and gates don’t have to break the bank.  Aluminum fencing products from iFenceUSA are priced reasonably; you get a high-quality aluminum fence that doesn’t require yearly maintenance or to be fixed and repaired regularly.  The only thing that is required to maintain aluminum fencing and keep it in good, working condition is a solid cleaning that removes the dirt and mold which can be done using a basic combination of soap and water.

Customization

Another major benefit to aluminum fencing is that it is highly customizable.   You can choose exactly what you want from a fence and gate when you decide on ordering and installing an aluminum fence and gate.  There are 18 different styles of aluminum fence that can be ordered in 4 different grades and in 9 different colors when ordering from iFenceUSA.  Additional pickets can be installed between the existing pickets and even closer pickets near the base can be installed all to provide more security to keep small children and pets contained within the yard. 

An aluminum fence is appealing to homeowners for a number of reasons.  Not only are there benefits to current homeowners but future homeowners as well.  When you want to add a welcoming feel to your property nothing holds it appeal as well as the addition of an aluminum estate gate with a corresponding aluminum fence around the perimeter. 

iFenceUSA is an online distributor of wholesale aluminum fences and gates for residential, resort, commercial, and industrial applications.  As an industry leader in maintenance-free aluminum fencing products we have all your aluminum fence and gate needs covered.  More information can be found online at https://www.ifenceusa.com/.



Home Remodels for Aging In Place to Avoid Retirement Homes


Let’s be completely honest, no senior in their retirement years are ready to leave the home that they have lived in for most of their lives to move to a nursing home or other assisted living option. Your home no matter your age is the place you put roots down and have many memories that are hard for anyone to let go of just because their physical abilities change over the years. For this reason, aging in place modifications has increased tremendously to allow these elders to do just that. Staying home can come with many obstacles that an experienced licensed contractor can provide plans for a simpler way of living as a person continues to grow older no matter if you’re in your 60s or want to remain in your home till over 100.

Installation of Grab Bars

One of the most dangerous rooms in your home is the bathroom for many reasons. The floor can be slippery at times causing many falls to occur no matter your age. Installation of a grab bar could make the difference of breaking bones from an accident or being able to live happily and safely in your home for the elder years in your life. Grab bars are typically made of stainless steel and prices can range anywhere from $100 to a couple hundred depending on size and location. It is recommended to install these pieces of safety hardware in a place that is accessible before and one inside the shower or tub as well. The bathroom is an ideal area to install a grab bar by your aging in place home remodeler, but there are other areas that would be very beneficial as well in your home. Common uses for these tools can also be utilized where any type of balance is needed such as railing in the garage to help someone get in and out of the house. It would also be a great idea to install grab bars for support going up or down any number of stairs.

Widening Doors and Wheel Chair Ramps

It is common in older homes to have doorways that can be very narrow compared to the newer homes that have a standard size of at least 32 inches in width. This smaller size prohibits handicap accessibility and makes it difficult for those that use wheelchairs or walkers to get from room to room easily. Hiring a licensed contractor to increase the size of the door ways is another great aging in place home renovation. Prices can range depending on the door sizes and how many throughout the house that must be widened but can expect $400 – $800 in cost per door.

Another ease of accessibility for seniors to have installed is a wheel chair ramp. Replace indoor or outdoor steps with a ramp will make transportation much easier for older adults with less risk of falling. Installation of a wheelchair ramp can be on the expensive side depending on factors such as the type of ramp installed. Temporary ramps can range in price from $5,000 to $6,000 or if looking to have a permanent structure attached to the home prices can be more towards $12,000 to $14,000. Before deciding on a ramp, it is always best to decide on each person’s unique needs and also think of what the future may hold whether you may start with just a walker and need to switch to a wheel chair or perhaps the use of a wheelchair may be more temporary so spending your investment on aging in place tools should be thoroughly thought out to maximize your independence through out your house to continue to live a happy and healthy life inside your home.

Glen Miller the Home Doctor is a licensed general contractor servicing Livingston County and the surrounding areas.  Glen offers a wide range of services including home maintenance plans, age in place remodeling, kitchen and bathroom remodeling, finished basements, and hardwood floor refinishing.  More information can be found online at https://www.glenmillerthehomedoctor.com/.



Questions That Are Important to Ask When Buying Electrical Surplus Inventory Online


When a project is cancelled, warehouses are liquidated, or there are manufacturing overruns an electrical surplus inventory is generated.  Local surplus dealers were once the only sellers of electrical surplus inventory.  Today however, surplus equipment can be purchased through e-commerce platforms.  It is important you should proceed with caution when you come across surplus electrical component’s suppliers online; research and asking the right questions when buying online is crucial.  Below you will see how you should proceed when buying electrical surplus online.

Asking the right questions when buying surplus electrical equipment online helps you make the right purchase.  These questions should include:

  • Is the equipment a product that is from the original factory?
  • Will the new surplus inventory come in a sealed box?
  • Are there any visible structural damage like fractures or cracks in the equipment?
  • Do the products being sold contain any proof of safety and reliability?
  • Are there any signs of the equipment being burned in any way?
  • Has the equipment been in use, when?
  • Has the product failed?  What were the circumstances of the failure?
  • Do the products come with a warranty? When does the warranty expire?
  • Does the equipment have a period in which it can be returned if it does not meet the required standards?

Essentials to Consider When Purchasing Surplus Electrical Equipment

Voltage Ratings Input/Output

Know the voltage rating of the surplus electrical product as well as the voltage rating of your power sources.  This will determine if the equipment is suitable for your application.  Incorrect voltage ratings risk short circuiting, arching, and electrical fires.

Continuous Current Rating

The continuous current rating will allow you to know if the device will be able to perform properly in varying environments.  This is listed as Amperes.  They represent the continuous current that can be carried when used in the temperatures it is calibrated for.

Current Rating, Short-Circuit

Short-circuit current rating, SCCR, is a current rating that defines the maximum short-circuit current the product can safely handle.  Individual SCCR components for the electrical assembly are calculated to determine the SSCR for the entire electrical panel.

Electrical Current Frequency

Pay attention to the current frequency at which equipment or breakers are designed to operate properly.  The electrical current frequency determines the highest current a device can handle operating at without issue.

Don’t compromise the quality of surplus equipment by purchasing from a less than a reputable electrical component supplier.  At J & P Electrical, we assure quality and competitive pricing.  Contact us today to discuss your needs. 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugs, bus ducts, panel switches, and transformers. Services include asset management, product reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com



Common Summer Projects For Your Home


Summers are a great time in Michigan.  It is the perfect time to enjoy the beach, BBQ’s, and flip flops.  It is also the perfect time for homeowners to tackle home improvement projects.  The weather is finally perfect – no snow, ice, or excessive wind.  The summer months are the perfect time to assess your home, make general repairs, perform maintenance, and take on larger scaled projects like the installation of a new roof, kitchen remodels (YEAH FOR BBQ’S), porch upgrades, upgraded decking, and more.  Depending on your budget and the renovations you choose, you can increase the overall value of your home by updating the space.

The Most Common Summer Projects

  • Pressure Washing – Nothing speaks louder than a well-maintained home.  Power washing your homes siding and decking is an inexpensive way to clean your home.  Removing mold, algae, and mildew can result in increasing the longevity of your sidings lifespan.  Pressure washing costs about $500 for a professional to complete or for the DIY a power washer can be rented for about $50 for four hours.
  • Landscaping – Any home improvement that increases your homes curb appeal will add value to your home.  Landscaping doesn’t have to be complex, simple lawn care and maintenance with a few flower beds to enhance the space can really transform a home.  If you are not interested in hiring a professional landscaper, it is important to have a plan in place before diving into landscaping. 
  • Kitchen Renovations – When it comes to kitchens it is best for homeowners to work with a reliable contractor as kitchen remodeling can take a quick turn in the wrong direction.  You don’t need every one of the latest gadgets, top line appliances, and exotic materials to create a kitchen that is the envy of the neighborhood. The most important aspect is the layout and flow of your space. 

A small kitchen can function better than a large kitchen with the right layout design.  An important aspect in renovating, especially in kitchens is lighting.  Modern lighting overhead and underneath cabinetry can transform the overall feel of the space.  Including a backsplash is always an inexpensive way to add to the look of the space.  Believe it or not, it is possible to completely redo the look and feel of a kitchen can cost as little as $4,000 when you hire a professional kitchen contractor.

  • Deck Additions – Summer is all about creating an environment outdoor that is both functional and comfortable.  Adding to your deck is a great way to make the space usable.  Outdoor kitchen spaces, comfy lounge spaces, sitting nooks, fire pits, high top bars, the list of outdoor decking renovations that add value to your space are endless.   Renovate your deck into a space that feels like you are on a constant vacation. 

JFC Remodeling is a full-service licensed contractor out of Howell, Michigan.  Specializing in kitchen and bathroom renovations, flooring upgrades, and home remodelingservices.  More information can be found online at https://jfcremodeling.com/.