Why is Asset Recovery Important?


Electrical plants can house a plethora of dangerous components and parts, and when one is torn down, for whatever reason, often what is left behind can be troubling for more than one party. Asset recovery is a very important step in this process and is something one should consider when dealing with large-scale tear-down projects. Fortunately, many organizations exist with fully insured, experienced, and professional experts who specialize in the proper recovery of assets of all kinds. Regardless, there are a few reasons to keep in mind as to why asset recovery is important.

Bad material in planet

 Electrical components may sometimes be made from natural resources, but the vast majority are man-made objects and thus do not do the planet any favors when left behind on tear-down sites. The material used to make these objects need to be recovered by a company that specializes in asset recovery so these materials can be stripped down and either recycled properly or reformatted to fit within new products. If this does not happen you can see these objects sticking around far longer than the planet would like, which benefits nobody.

Liabilities and cost

The cost of electrical components and parts can vary from relatively cheap to astonishingly high prices, depending on the nature of the item. It’s obvious that companies want to make money, so the idea of leaving assets and potential dollars on sites is not business owners. Being able to recover these assets ends up saving the supplier or manufacturer thousands of dollars AND prevents the assets from causing harm to the enviroment.

These components or IT assets can be a liability if not properly recovered and/or recycled. For certain IT components and devices, the possibility of sensitive information can always remain despite any attempts of wiping data, and anybody can recover these assets not affiliated with any professional asset recovery organization and use that data to their own advantage. It’s important that proper recovery is completed to not leave any potential data leaks from happening onsite.

Stolen

An obvious reason in which asset recovery is important bleeds into the prior two reasons: stolen property. Because a wide variety of electrical and IT components and parts are very expensive to the manufacturer no business wants to waste the money having their equipment stolen by somebody before it can be properly recovered. Theft is a widespread and universal issue spanning all industries and the theft of electrical components is not spared. It is an ongoing issue with theft and that is a good reason to support the recovery of electrical assets.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugsbus ductspanelswitches, and transformers. Services include asset managementproduct reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com



Understanding Bus Plugs


If you are not an electrician or familiar with the terms used in the electric power fields, the products that make our homes and business run efficiently may be very mysterious. For some people, a bug plug sounds like its something the belongs in the automotive industry for actual busses? We are here today to get your electrical knowledge straightened out and give a inside look to what a bus plug really is and what it does.

What Is It exactly?

Bus plugs are basically what the name entails and are large industrial electric plugs that are like the ones you find in homes. However, Industrial or manufacturing plants that utilize heavy machinery require specialized power needs that is unique when compared to typical power distribution systems that are used inside residential or commercial buildings. Each bus plug is designed to connect to a specific section of bus duct or also known as busway, overhead and will then transfer electricity down to any chosen product whether it’s a lighting system or heavy equipment that needs power below. Busways were first produced in the late 1920’s for the automotive industry in Detroit and have since continued to improve and make their ways into many industrial plants to be utilized.

Why use them?

When looking at many industrial plants or buildings, many are structured in design with large open floor plans to maximize the total square footage and allow a variety of uses for the specific area. One of the major benefits of the busway and bus plug system is the flexibility of each product. With this type of installation, there is no physical hard wiring and the whole electrical system can be removed and rearranged to accommodate the building floor plan needed. As the future continues to change the machinery used, there are no concerns as to how power will be given to new equipment when things need to be moved or upgraded. Bus duct systems are a very efficient solution to get a lot of power to a big area that power distribution continues to change frequently. This is another reason why manufacturing plants need these products in order to provide large quantity of power to different areas of the building.

Proper Maintenance

Unplanned downtime can be detrimental and costly to any business and can be avoided with proper maintenance and service on products when needed. Bus ducts are extremely important in effectively providing power to switchgear and other different loads. Unfortunately, it is typical to find that critical systems that transmit power for industrial facilities are often neglected since many of people are unaware that regular maintenance and service is required even though bus ducts do not utilize moving internal parts.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugsbus ductspanelswitches, and transformers. Services include asset managementproduct reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com



Questions That Are Important to Ask When Buying Electrical Surplus Inventory Online


When a project is cancelled, warehouses are liquidated, or there are manufacturing overruns an electrical surplus inventory is generated.  Local surplus dealers were once the only sellers of electrical surplus inventory.  Today however, surplus equipment can be purchased through e-commerce platforms.  It is important you should proceed with caution when you come across surplus electrical component’s suppliers online; research and asking the right questions when buying online is crucial.  Below you will see how you should proceed when buying electrical surplus online.

Asking the right questions when buying surplus electrical equipment online helps you make the right purchase.  These questions should include:

  • Is the equipment a product that is from the original factory?
  • Will the new surplus inventory come in a sealed box?
  • Are there any visible structural damage like fractures or cracks in the equipment?
  • Do the products being sold contain any proof of safety and reliability?
  • Are there any signs of the equipment being burned in any way?
  • Has the equipment been in use, when?
  • Has the product failed?  What were the circumstances of the failure?
  • Do the products come with a warranty? When does the warranty expire?
  • Does the equipment have a period in which it can be returned if it does not meet the required standards?

Essentials to Consider When Purchasing Surplus Electrical Equipment

Voltage Ratings Input/Output

Know the voltage rating of the surplus electrical product as well as the voltage rating of your power sources.  This will determine if the equipment is suitable for your application.  Incorrect voltage ratings risk short circuiting, arching, and electrical fires.

Continuous Current Rating

The continuous current rating will allow you to know if the device will be able to perform properly in varying environments.  This is listed as Amperes.  They represent the continuous current that can be carried when used in the temperatures it is calibrated for.

Current Rating, Short-Circuit

Short-circuit current rating, SCCR, is a current rating that defines the maximum short-circuit current the product can safely handle.  Individual SCCR components for the electrical assembly are calculated to determine the SSCR for the entire electrical panel.

Electrical Current Frequency

Pay attention to the current frequency at which equipment or breakers are designed to operate properly.  The electrical current frequency determines the highest current a device can handle operating at without issue.

Don’t compromise the quality of surplus equipment by purchasing from a less than a reputable electrical component supplier.  At J & P Electrical, we assure quality and competitive pricing.  Contact us today to discuss your needs. 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugsbus ductspanel switches, and transformers. Services include asset managementproduct reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com



Installing Bus Ducts Properly

Bust ducts, known also as busways, are created from a sheet of metal with the busbar being made of copper or aluminum. Bus ducts conduct electrical currents, that is their main purpose when used in manufacturing.  Many companies manufacture bus ducts, with the most popular supplier being Square D.  Not only does Square D manufacture bus ducts, they supply a wide range of bus plugs, electrical switches, circuit breakers, and more.  Proper installation and assembly of a bus duct will save you money and prevent costly downtime. 

Proper Bus Duct Installation

In order to ensure your electrical system functions properly your bus ducts must be installed correctly.  Bus ducts are used to provide power throughout an electrical system so if there is an issue with the bus duct it can result in costly delays and downtime.  In order to avoid this, proper installation is required.

The Importance of Ampacity

The amount of electrical current that a device can withstand without being damaged is known as ampacity.  A bus ducts ampacity rating is determined by using the temperature within the operating space and referencing a standard chart for temperature assumptions.  Once the operating temperature has been determined users must consider the rise in temperature between a zero current and a full load current.  As an example, a common bus duct with copper inside often has a current rating of 2,000 amps per square inch.  The rating results in the voltage dropping as the temperature increases.

Additional Protection

Like with any installation especially electrical, location is a key aspect that needs to be considered.  For most facilities bus duct installation is downstream from transformers and upstream from the primary overcurrent device.  Whatever devices is being used to protect the transformer cannot be used to protect the bus duct from electrical fault.

Extra protection to the bus ducts is another way to decrease any potential downtime from occurring.  When downtime occurs, facilities end up paying for workers to stand around.  Adding an extra layer of protection to your bus duct will give you extra peace of mind as you will know your bus duct will properly function.   

Bus ducts that are installed outdoors should include protection from the elements.  Choose a shelter that allows water to drain vs sitting in a pool overhead.  Extra water allowed to collect can cause a short in the bus duct.  Humidity can also be an issue when bus ducts are utilized outside.  This can be prevented by using stainless steel as it inhibits corrosion.  An epoxy primer of paint can be added to the housing to prevent the oxidation of the metal.

Bus ducts can also be installed on an outside wall.  When this is the case proper flame-retardant wall fittings that are waterproof and vapor-resistant should also be used as a precaution.  Extra supports for the ducts where they enter the wall should be in place to hold the extra weight. 

The installation of bus ducts is important.  Correct installation allows a system to function properly without downtime.  Protection helps to prevent corrosion and protects from outside elements.  And using proper metals and assembly kits from the manufacturer help to ensure you are using the right materials for your bus duct assembly.

J & P Electrical Company is a full-service electricalcompany that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugsbus ductspanelswitches, and transformers. Services include asset managementproduct reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com

Choosing Circuit Breakers Over Fuses

In the past fuses were the only option when it came to protecting homes, businesses, and equipment against overloaded circuits, shorts in circuits, and other faults.  With advancements in technology, circuit breakers became a popular option over the use of fuses due to the number of advantages they are able to offer.  The use of modern-day circuit breakers creates increased safety and reliability, decreased costs, and additional support for energy management initiatives.

Benefits of Using Circuit Breakers

Performance Reliability

The performance of fuses can decrease overtime.  Age increases the instances of fault, causing fuses to open even under normal conditions.  There is no way for fuses to be tested thus the current value that causes it to become faulty can never be determined.  Circuit breakers however are tested when manufactured and can be tested throughout its lifetime to ensure peak performance.

Comprehensive Protection

Circuit breakers trip circuit, breaking the electrical connection, up to a thousand times faster than fuses.  The trip capacity of a circuit breaker is greater than the equivalent fuses.  Modern day circuit breakers provide exception fault current limitations which was once only known to occur with fuses.  This function offers reliable protection while increasing the life of equipment by decreasing the aging that occurs with frequently tripped circuits.  Unlike fuses that can experience an overload even when one of multiple fuses opens, this will never occur within a circuit breaker.  When one breaker experiences an overload, the connection will be stopped immediately.

Increased Safety and Production

Replacing fuses can be risky for untrained personnel.  Fuses have exposed conductors and therefore can be quite tricky to change out.  The connections for circuit breakers are hidden, being that it is unexposed it keeps re-connecting the circuit safer for employees.  A major cause of fires within industrial settings occurs because of fuses that were incorrectly replaced.  This could include using the wrong fuse, incorrect model and/or rating, and more.   These issues are almost inconceivable when correcting a tripped connection when using a circuit breaker. The time saved is also considerable when using circuit breakers as reclosing the breaker can occur instantly which prevents production downtime.

Savings

Although the cost of a single fuse is less than the cost of a circuit breaker overall the installation and usage is less expensive.  Consider that three-phrase circuits must have three fuses.  Also, the cost of keeping extra fuses in stock.  Overall operation costs of using fuses instead of a circuit breaker are higher.

More Functionality

Circuit breakers, unlike fuses, can offer additional functions like ground fault protection.  System coordination between breakers, cascading and selectivity cannot occur when using fuses whereas circuit breakers allow for this feature.  Newer technology allows for circuit breakers to use remote controls, have alarm features, offer measurement features, and communication within your network.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

 

 

The Basics in Wiring Electrical Disconnect Switches

Understanding how the electrical system works in your manufacturing facility is not as difficult as you may think. While it may seem like magic how the lights turn on or how the power gets to your stuff that you plug into the wall outlet. However, it is far from magical and in fact it is quite simple really. It is not a very complex system when explained.

 

There are several parts that make up your electrical service, one of the most important parts being the disconnect switch. This device is designed to instantly shut off the power to your facilities main power panel. This device is a very important part of your manufacturing electrical system and should only be used in extreme conditions.

 

How does an electrical disconnect switch work?

The basic operation of an electrical disconnect switch is simple in that it truly has only one purpose and that is to kill the power to the main power panel for your facility. All the facilities wiring goes into the main power panel and is connected to breakers that control the power inside the building. The disconnect switch sits in line between your facilities electrical meter and main power panel.

 

By turning this switch off you will instantly disconnect all power going into your location, this does not however, have any effect on your electrical service. You will continue to have power at the meter and on the feeder side of disconnect switch.  It is important to know where your electrical disconnect switch is, which is also referred to as the electrical service disconnect switch.

 

When repairs or replacement is needed it is important to find the right parts.

Due to the seriousness of the functionality of the electrical disconnect switch only trained professionals should ever open up the disconnect switch box. This is because the feeder lines going into the switch have 240v running through them and that is enough to kill a person if you are in direct contact with it. When repairs are needed, and it becomes necessary to replace the electrical disconnect switch there are several options that will be recommended.  One of the more common options in manufacturing is budget friendly reconditioned disconnect options.

 

When parts are needed you can insist on using reconditioned equipment.  Often reconditioned electrical components like the disconnect are preferred as they not only save you money but most often all the bugs that are found in new OEM parts have been worked out and fixed.

 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

 

How Reconditioned Electrical Components Can Save Manufactures Money

If you are a manufacturer of products you know how essential it is for you to keep those operating costs down to make as much profit as possible and to see your business thrive.  One way of reducing your overhead is by purchasing those raw materials at the least expensive rates possible.

Another way of reducing those operational costs is by replacing those worn out electrical parts needed in your manufacturing equipment with quality reconditioned electrical distribution equipment and reconditioned electrical parts. Keep in mind that not all parts that need to be reconditioned have functional problems to begin with, the parts may simply have been leased and when the lease has expired the part may be returned and need to be reconditioned before being issued for sale. Reconditioned electrical parts are of similar quality as new parts, but simply cost a lot less.

As surprising as it may be, purchasing high quality reconditioned electrical parts can save your manufacturing company anywhere from 50% to 75% over purchasing new parts and when quality reconditioned electrical equipment is reconditioned properly they can last if those new parts as well.

Choosing the Right Reconditioning Company

Of course you don’t want to purchase reconditioned electrical distribution equipment from just any company that reconditions these types of parts you want to buy those reconditioned electrical parts from a company that has an excellent record for those parts they sell and you want to make sure that the company has excellent reviews from places such as the Better Business Bureau and Google as well as testimonials on the company’s website.

When purchasing reconditioned electrical parts even from a reputable company here are some things you want to know about the reconditioning process before purchasing those parts.

Here are a few of the questions you want to ask.

1) What type of electrical parts does the company recondition? Does it recondition and sell the types of parts your manufacturing company needs?

2) Does the reconditioning Company completely disassemble the use part and clean all the parts and examine them to ensure that each of the smaller individual parts are in good condition?

3) Is the reconditioned used part then repainted with quality paint to give it that new like look and help to protect the part?

4) Is the reconditioned part tested once it is put back together and does the reconditioned part meet or exceed the Manufacturers UL certification.

5) Does the reconditioned part come with some type of warranty, so you can be assured that the money spent on the used part won’t be wasted?

By purchasing high quality reconditioned electrical components manufactures can save significant amounts of money when replacing those old worn out electrical parts for you manufacturing machinery. If your company is looking to cut operating costs, then buying reconditioned electrical parts for a reputable company may be one way do so.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

 

How Are Bus Plugs and Ducts Used in Manufacturing?

All buildings whether commercial or residential require some sort of electrical power in order to provide lighting, outlets and other electrical devices. For commercial buildings, you have power needs for machinery, lighting, cooling systems, and other types of electrical needs. Typically, in a residential building, you have electrical service entering the house with cables. This is different then how electrical power is distributed in commercial and manufacturing settings.

Commercial buildings, especially those used by medium or large-scale manufacturing businesses use a larger type power distribution system that requires a much different way to run power through the manufacturing spaces of the building. Unlike residential power distribution which uses cables to carry the power throughout the home, commercial building use bus ducts or sheet metal runs with either aluminum or copper busbars.

History of the Busway Power Distribution System

The busway and bus bars were first introduced in the US back in the 1920’s at the request of the auto industry in Detroit, Michigan. The system gave them the necessary versatility that was needed for supplying power to the assembly line equipment that was being used in the manufacturing facilities at the time. Over the years since, there have been numerous innovations that have improved on the original design and installation procedures.

 

Commercial Power Distribution System Components

Heavy duty machinery typically found in manufacturing plants have unique power requirements which cannot be served by typical power distribution systems that are found in most residential homes and most commercial buildings. For these unique power requirements, there is a power system that is designed especially suited for this type of need. Bus Ducts and Bus Plugs are combined to deliver the necessary power to each machine

 

Bus Ducts – Bus Ducts also referred to as busways are sections of sheet metal with bars attached to them that are made of either aluminum or copper.  The sections are connected together in order to reach each piece of machinery that is needing the power. This type of power distribution system requires trained, certified professional electricians to install them and ensure that they are in full operation at all times.

 

Bus Plugs – Bus Plugs are specially designed components that work in tandem with the busbars in a unique type of power distribution system that is typically installed in a large-scale manufacturing facility. Each bus plug is used to connect directly to busways that are running throughout building to deliver the power to equipment like large motor starters and other power switching equipment.

Indoors and Outdoors Power System

One of the benefits of using this type of system in a manufacturing facility is that it can be used both indoors and outdoors to deliver the necessary power to different parts of any operation. The unique design of the system helps to prevent voltage drops across each of the numerous sections of the bus ducting throughout the building.

 

The system can also be fitted with a trolley system that is designed to deliver power to equipment that is designed to move frequently. There are also cables that are used to deliver the power directly to the trolley itself.

 

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Fused Disconnect Switch vs Circuit Breakers

For all those people who are looking for major differences between fused disconnect switches and circuit breakers, this post will eradicate all your confusions and help you to make the best choice. Before proceeding further, let’s shed some light on why you need devices such as circuit breaker panels and fused disconnect switches.

Electrical circuits in residential and commercial establishments are designed to carry a certain amount of current. Due to any reason, if more current passes through them, it can lead to dire circumstances where sensitive appliances and equipment can be destroyed. In some situations, this overflow of current through electrical circuits can also result in a fire that can prove to be extremely fatal for the inmates of the building.

In order to prevent such a situation from happening, different devises such are used that serve the purpose of protecting overcurrent in wires. These devices, in a current overflow situation, disconnect or open the circuit. This helps in preventing the fire from erupting. Thus, there are fewer chances of any damage to be caused to appliances and equipment installed in the building. Devices such as circuit breaker and fused disconnect switch also work in case of short-circuit situations.

Now that you are aware of the basic function of both these devices; let’s now have a look at major differences between them.

Fused Disconnect Switch

A fused disconnect switch, as the name suggests, is a combination of a fuse and switch. The fuse shuts the circuit off and switch disconnects it in case of an issue. Switches are designed to be shut the power off manually. On the other hand, fuse works in the opposite way. They are made up of a small filament that melt down in case of a current overflow. A fuse’s current rating is preset. Thus, when the current exceeds the rating of the fuse for a longer period of time it melts automatically. As a result, the circuit is disconnected.

A point to note here is that when a fuse disconnects the circuit, it can be used again. Power can only be restored if the fuse is replaced by a new one.

Circuit Breaker

With circuit breaker, there is no issue of getting a new fuse every time it turns the power off due to the overflow of current or short-circuit. Thus, it is often considered a better option for many appliances. Circuit breaker panels can also be turned off in a manual way as they also serve the functions of a switch. This feature makes them handy if you want to do get some electrical work done in the building.

A circuit breaker disconnects the circuit automatically with the help of an electromagnet it features when it detects overflow of current or a short-circuit. After the problems have been fixed, it only needs to be turned back on for restoring power.

A Final Word

To sum it up, both these devices can help a great deal to eliminate issues caused by the overflow of current or short-circuit. As stated above, a circuit breaker disconnects the circuit both automatically and manually and a fused disconnect switch offers the same purpose. The difference lies in their design and functionality. Thus, when selecting them, take into consideration the electrical requirements of your premises for taking the best decision.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

How Are Circuit Breaker Panels and Disconnects Used?

Circuit Breaker Panel

A circuit breaker panel is the main point from where electricity is passed around to other electrical circuits. Power for your house comes through the service entrance which passes through the electrical meter which records the amount of voltage you use. It then flows through the circuit breaker panel. The panel usually gives out 100 to 200 amps of power. The panel, in short, is just a bunch of switches.

The service entrance wires are attached to terminals called lugs. Lugs are always energised with electricity unless your local power company shuts it off. A dead front cover, which is a metal panel, covers all the lugs and electrical wiring connected to the panel. The dead front cover provides access to every breaker and switch.

The circuit breaker panel always consists of a main breaker which is a large switch. If the main breaker is shut down, then electricity access to every other circuit is cut off as well. However, the lugs remain energised with electricity. Main breaker activity does not affect the lugs. The circuit breaker panel always has two rows for the branch circuits. It includes circuits which provide 15-20 Amps of energy for lighting or fans or other outlets in a kitchen or garage. Branch circuits which are labelled with 40-50 amps of energy are known as ‘double pole breakers’. These supply electricity to high voltage appliances such as dryers or air conditioners. A large breaker may also supply electricity to a sub-panel which is mainly used for electricity in detached r quarters. The panel also has hot & neutral bus bars. Moreover, the ground wires prevent electrocution from happening due to frayed hot wires. Many circuit breakers also consist of disconnectors.

Disconnectors

A circuit breaker disconnector is used to isolate the electrical circuit from electricity to maintain or repair it. A disconnector is only used for safety purposes and can be operated either manually or automatically. Circuit breaker disconnectors are off-loading devices which means that they do not contain the workings for controlling electric arcs and should be opened after the current is interrupted by another device.

A circuit breaker disconnect consists of a lock-out tag-out that prevents inattentive operations from happening. These locks are part of a trapped-key interlock system so that there is steady stream of operations.  A switch disconnector combines the properties of a disconnector and load switch.

In disconnecting circuit breakers, the disconnector is integrated so that there is no need to use separate disconnectors. This has the advantage of being reliable and the need for maintenance decreases. The usage of this device is, however, limited as compared to a disconnector because there may be problem which arise while maintenance takes place.

A fused disconnect is used to replace a circuit breaker as it works in the same way and is cheaper. It can turn a circuit on or off and its fuses can provide protection. Having more information about electrical breakers and disconnectors can help you in every-day life. If a small electrical problem was to arise, you’d be able to solve it yourself.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.