Picking A Suitable Well Water Iron Filter

Using a water softener system has been shown to extend the life expectancy of plumbing because it eliminates scale build-up in pipes and fittings. Not only does hard water clog your plumbing but it also reduces the efficiency of your water heater and other household appliances.

You know that the water you are using is hard if soaps and detergent do not dissolve or lather easily and you have probably noticed that your once shiny silverware now appear dull and do not have that sparkle after washing them. Hard water is also known to dry the skin and hair and leave white mineral deposits on your surfaces.

Some homeowners don’t mind using hard water, aside from the annoying scale buildup in the plumbing system. However, if increasing the efficiency of your appliances, plumbing, and heating is your goal installing a whole house water softener with a special filter for iron will get the job done.

The whole house water softener with a special iron filter, is a chemical and maintenance-free process designed to remove water hardness including iron that causes the red staining and rust in your toilet bowls, sinks, and appliances. The system eliminates that iron-tasting and rotten egg odor which originates from well and city water that has high amounts of iron and manganese.

A water softener with an iron water filter unit is economical, it requires much less space and it’s easy to operate because it replenishes itself on demand in a process that washes the stored iron out of the filter bed and down the drain. Every home needs something unique to their water needs and therefore only after a water analysis is performed should a water treatment system be purchased.

A reverse osmosis water softener is a home water filtration system that uses pressure to force water through a semi-permeable membrane that allows it to pass through while blocking up to 99% of impurities and contaminants.  In addition to producing safe, clean, and the purest quality of water, the reverse osmosis water softener is convenient to use.  It is easy to clean and only requires a periodic replacement of disposable filters.

A reputable water conditioning company will be able to assess your family’s needs and install a water treatment solution that is designed specifically for your water and usage.  Quality drinking water is a need for all homes.  A proper water softener can not only improve your homes water quality.

At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need.  We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help!  For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.

What You Should Know When Repairing LINAC Systems

A linear accelerator service engineer is responsible for the repair, testing, and calibration of imaging and clinical equipment, devices, instruments, and systems. In addition to the inspection and installation of LINAC systems, it is an accelerator service engineer’s role to repair defective medical equipment and provide scheduled maintenance of specialized equipment in accordance with departmental and manufacturer protocols and specifications on a routine basis. Consider the following points when servicing or repairing LINAC systems:

  1. Know the parts of a LINAC system

Even though third generation LINACS are now computerized and have improved beam modifying systems, you still need to be conversant with some if not all the main units of a LINAC, including the major components that are housed in a modular cabinet. Do you know what a klystron or magnetron is, or a wave guide, a circulator, an electron gun, including the water systems the LINAC is composed of and much more?

  1. Diagnose and correct system and equipment malfunctions

As a linear accelerator service engineer, you should develop accuracy in judgment, planning, technique, and confidence in dealing with systems emergencies and malfunctions when servicing linear accelerators. You must exhibit knowledge of the various elements of a LINAC system, analyze the situation and take the appropriate action so that your clients can have more confidence and trust in your work.

  1. Maintain accurate records of work performed

Whether maintenance is scheduled or unscheduled, it’s important to keep a comprehensive record to help you keep track of all the maintenance work. Records also enable you to arrange a time to provide maintenance on the machine when needed, at the same time it ensures that the LINAC system that you have already repaired is safe to work with and you can prove it with your records if necessitated.

The records should also show the customer’s details, the detail of the complaint, when you arrived at the job site and the evidence documenting that the LINAC system was checked. Always follow the manufacturer’s recommended schedule.

  1. Use quality OEM replacement parts

Linear accelerator parts and accessories are met with strict guidelines throughout the reconditioning process. In the event you are called to repair LINAC Systems, and you must replace an important LINAC part, ensure that the accelerator parts meet and exceed the OEM specifications, but always talk to the client to make sure that they are willing to meet the costs.

  1. Linear accelerator removal and disposal

A LINAC is a very heavy medical equipment and challenging to remove. The removal and disposal of medical equipment of either radiation, oncology or imaging equipment is an important skill set for all equipment engineers who are required by law to comply with state regulations, for liability and safety reasons.

Work with experienced riggers who have the appropriate equipment to remove a linear accelerator and with a knowledge of pulling the concrete around the base frame of a LINAC system without damaging it because most LINACs can be recycled and reused.

Acceletronics is an independent service company dedicated to delivering the best equipment performance and service reliability from Linear Accelerators and CT Scanners across all major brands and models. Learn more about Acceletronics and their selection of new and refurbished linear accelerators and CT scanners today at http://www.acceletronics.com.  To contact one of our LINAC experts call 610.524.3300.

 

How Much Will a New Fence Increase the Value of your Home?

The addition of a new fence to your home can serve various purposes: privacy, stopping wild animals from gaining access to your yard, and protecting your children and pets. However, a new fence in the yard serves another purpose, it adds value to your home.

With lots of homes in the market and lots of buyers too, you must sweeten the “taste” for potential buyers to attract their interest. Privacy fencing is one of the few exterior home improvement plans that can enhance the beauty and value of your home. How so? Here are a few ways the addition of privacy fencing can increase the value of your home.

Improves Curb appeal

The installation of a privacy fence generally adds to the cub appeal and value of the home. However, not all new fence installations would increase the value of your home. A chain link fence may prove to be less costly, but its resale value would be very minimal over time. On the other hand, an aluminum gate may be expensive to install, but it massively increases the overall beauty and resale value of the home. There are companies that build and provide wholesale aluminum fence panels, specific for your home design and local weather conditions. When a buyer has a wide range of choices to make, unique homes such as those with aluminum gates easily stand out.

Security

A new fence installation provides a sense of belonging to a potential buyer. Although it may not totally guarantee the security of a home, it provides some form of deterrent, making it more difficult for people to gain access to your property, especially through the backyard area that is less visible. Every buyer needs an apartment with some reasonable level of security. An aluminum gateinstallation is especially ideal for this purpose.

Reduced Chance of Litigation in Future

Privacy fencing establishes some form of clear boundaries and this would decrease the chances of any future litigation since your neighbor would be unable to intentionally encroach onto your property. Although there is always a chance there could be a property dispute in future, the addition of a new fence helps to assert ownership of your property and decrease the chance of intruding, whether intentionally or inadvertently. If a buyer feels that there could be a litigation problem with an adjoining neighbor in future, this will largely reduce the value of your property. With the installation of privacy fencing, the buyer would have a great level of security and full ownership after purchase.

Landscaping

Animals such as deer could destroy the gardens and landscape of your property. Gardens considerably improve the resale value of any home. The addition of privacy fencing would prevent entry of unwanted animals that could compromise the garden and overall landscape of the property.

If built by professionals and maintained over time, the addition of a new fencehas a significant impact on the resale value of a property whenever you decide to sell. While it may not have monetary value now, you can rest assured you would be getting some good returns when it is time to sell the property.

iFenceUSA is an online manufacturer and distributor of wholesale aluminum fencing. With over 18 styles of aluminum fence panels and gates to choose from, we have aluminum fences that will meet your wants and need.  Choose from custom aluminum fencing options including: Commercial Grade Aluminum Fencing, Residential Grade Aluminum Fencing, Pool Grade Aluminum Fencing, and Industrial Aluminum Fencing all at https://ifenceusa.com/.  For more information contact one of our aluminum fence experts toll free 800.762.2907 or via email at info@ifenceusa.com.

REASONS FLEXIBLE PACKAGING IS REPLACING THE TIN CAN

As the name suggests, flexible packing is quickly gaining popularity with consumers and businesses alike for many reasons. Even though tin cans can be recycled, they are very bulky in terms of manufacturing, weight, and transportation. Flexible packaging benefits the manufacturer, retailer, and consumers in one way or another.

Convenient

A flexible packaging does not have a firm structure such as plastic bottles or soda can. Instead, it conforms to the contours of its contents. The one thing that resealable zipper pouches, stand-up packaging, three-sided seal bags, zipper bags, and medical bags among other flexible packaging is that they offer both easy opening and re-sealing alternative to fumbling with childproof bottle tops. Consumers are enjoying products with the flexible packaging because they are portable, they are resealable, they don’t take much storage space, they offer single-serve portion option, and there are pouches that are microwave -friendly where food can be heated while in the package.

Easy Production

Shrink sleeve labeling has turned packaging into an art. Flexible packages are made from easy yielding materials such as plastic among other things like light stabilizers, wax paper, colorant, etc. Unlike using shrink sleeve labeling on plastic containers, which striking as they are, they can be removed and discarded, the flexible packaging serves as both the attractive design and the container. This printing technology has become very popular with retail, food, industrial, medical, and pharmaceutical companies because it saves them money that would otherwise be spent on purchasing containers and then paying for the cost of shrink sleeve labeling.

Reduced Weight of Packaging

Because the packaging material is significantly lighter, many businesses are opting to use pouches rather than bulky bottles that take up too much space. Consequently, manufacturers can produce up to three times the total of products, and business can benefit from the additional stock, which, does not pose any storage challenges. Depending on the product, flexible packaging can be stacked on top of each other to create additional space if needed. This type of packaging offers up to a 20% space savings compared to regular container packaging

Increased Shelf Life

A process known as scavenging removes oxygen trapped within sealed flexible packages to safely extend and protect original food flavor, aroma, and texture of products such as coffee. Flexible packaging is also made from a combination of FDA approved plastic films, poly, foils, and papers, that keep dry goods moisture-free and wet products moist. Doing so not only prevents putrefaction and extend the product’s shelf life, but also protect products from being contaminated by foreign substances when on store shelves and prevents wastage while at it.

Good for Business

Shrink sleeve labeling has gone and done it again. Not only have the graphics on flexible packaging improved, but the packages are also attracting more consumers with the different shapes and designed pouches that have enabled different brands to stand out and create a sustainable source of living for many people.

Learn more about Anchor Printing and their vast line of custom product label & packaging options including: Shrink Sleeve Labels, Flexible Packaging, Roll-Fed Labeling, Pressure Sensitive and Cut & Stack Labels at http://anchorprinting.com/flexible-packaging.php.  To contact one of our label specialists, call toll free at 800.748.0209 or via email at info@anchorprinting.com.

Common Estate Planning Myths

We have all seen it on TV or heard about a well-to-do individual who unexpectedly dies without leaving a valid will, trust, or estate plan consequently leaving the court to dictate how the deceased’s assets are distributed to his or her living heirs. When individuals pass away without leaving an official will, their property or estate must be distributed according to the rules of intestacy where only married, civil partners, immediate children or some other close relatives can inherit the property.

Protecting Your Assets

However, if someone has a will, but it is not legally valid, probate will decide how the assets are divided and not the wishes stated in the will. Which is why you need an estate planning attorney who can help you in creating an estate plan, among other things such as avoiding probate and reducing estate taxes. It is also important to seek the advice of an estate planning attorney to ensure that your beneficiaries are protected from creditor problems, bad decision making or outside influences.

Having someone in charge after you die will also protect your assets from unexpected creditors and go a long way towards avoiding family feuds and costly probate court proceedings. It’s important to have probate lawyer so that your family members can have some security in the event of your passing, especially when you fear that disputes may arise from the disposition of property.

After all the, it is the probate lawyer who prepares and files a petition for the final will distribution. He or she can also liaise with your attorney to handle non-probate issues that require legal attention, such as obtaining payment of life insurance, payment of annuities as well as handling subsidiary probate if any property is owned in another state.

Common Estate Planning Myths:

Are you a victim of the following estate planning myths and misconceptions?

I’m Too Young for Estate Planning

Someone as young as 20 years can have a will. Therefore, starting your estate planning while you’re still young and keeping it updated regularly will keep your assets free from legal complications in the event of incapacity or death.

I Don’t Need an Attorney to do Probate

You do because the procedural requirements for probates are complex and handing the task of preparing a detailed estate plan to a personal representative will alleviate an enormous burden on you. Besides, your estate planning documents rendered invalid due to errors when you do it yourself.

I’m not Wealthy

All adults who have children or own any property or assets should plan for incapacity and death regardless of the value of their estate.

The Court Can Correct a Bias Will

Even if a will benefits one person or sibling more than the other, the court is not authorized to revise a deceased Will provided he or she executed a valid will in the first place. You may also have a revocable living trust, however, making a will is the best way to transfer guardianship of minors.

Contact Us

Learn more about attorney Sean J. Nichols and the legal services he provides for clients including: estate planning, elder law issues, Medicaid planning, elder care, probate law, guardianships, and power of attorney (POA) at www.seanjnichols.com.  To contact the offices of Sean J Nichols, call 734.386.0224 today.

 

How does PRK laser eye surgery differ from LASIK?

PRK and LASIK vision correction methods are the most popular modern procedures for the correction of astigmatism, nearsightedness, and farsightedness. While their outcomes are ultimately similar, their procedures differ. Ophthalmologists usually determine the best procedure for a patient depending on the unique laser vision correction needs of the individual. But how does PRK laser eye surgery differ from LASIK?

PRK Laser Procedure

PRK (photorefractive keratectomy) Laser Procedure was the first eye surgery vision correction method – direct predecessor of the LASIK procedure. This procedure involves the removal of the thin outer layer before reshaping the corneal tissue using an excimer laser. Within a few days after the eye surgery, the epithelium repairs itself, growing back over the surface of the cornea.

LASIK Procedure

Lasik is a procedure which involves the creation of a thin flap on the cornea with the aid of a femtosecond or microkeratome laser. The thin flap is lifted in order to expose the corneal tissue, after which it is replaced following the reshaping of the cornea using an excimer laser.

PRK vs. LASIK

A major difference between PRK Laser surgery and LASIK is in the first part of the procedure. While LASIK involves the use of a thin flap at the corneal surface, PRK does not. Hence, so long as an individual is a candidate for LASIK, he/she would also be a candidate for PRK. However, a PRK patient may not necessarily be a LASIK patient. PRK is recommended for patients with thin or steep corneas, large pupils, irregular astigmatism, and history of eye syndrome or eye surgery.

The end results of both procedures are very similar – the difference is in the healing process. The initial recovery of PRK procedure is slow because it takes a few days for regeneration of new epithelial cells to take place so the surface of the eye will be covered. The risk of eye infection and vision haziness is also increased in PRK surgery in the few days after the eye surgery and the final outcome is gradual and could be achieved after several weeks. On the other hand, LASIK patients usually experience less discomfort with quicker stability of vision.

Although the healing process of PRK is a lot slower than LASIK, the procedure has some unique benefits. Since PRK surgery does not involve the creation of a thin corneal flap, applying treatment to the thick area of the underlying stroma is possible. This is especially beneficial to patients with thin cornea (who are not qualified for LASIK) and those who have previously undergone a LASIK eye surgery. PRK is also beneficial because the patient is not exposed to the risks of removing too much cornea or potential flap complications.

If you are looking to reduce or even get rid of your eye glasses and/or contacts let us at Rohr Eye & Laser Center help you! We offer several types of LASIK eye surgery including PRK, AK, CK, Cataracts surgery and more. We perform all these eye laser treatments with state of the art equipment. We are a leader in laser vision correction, and our goal is to help you achieve superior vision. Contact us today or view our website http://www.michiganlasik.com/  to schedule an appointment.

How do Water Softeners Work?

A water softener is a special type of filter that eliminates calcium and magnesium in hard water and replaces them with sodium through the ion exchange system. Since calcium and magnesium interfere with the action of soaps and detergents while sodium does not, a water softening system is important to ensure detergents are able to eliminate dirt and oil stains more effectively. It also provides a slippery feel to the skin when you wash.

Components Of A Water Softener

A water softener is made up of three major components –a resin or mineral tank, a control valve, and a salt-water tank. The mineral tank is the area where water softening takes place and incoming water passes through plastic-like beads also known as resin and made of polystyrene. These beads have a charge that is negative, attracting calcium and magnesium from the water since they are positively charged.

The attraction ensures calcium and magnesium adheres to the plastic beads as water flows through the tank. As the water gets to the bottom area of the tank, “softening” would have taken place. The “softened” or conditioned water now passes through a riser tube and outlet manifold, before it is distributed through a cold-water pipe to the house.

Over time, the resin droplets become caked with calcium and magnesium and must be “recharged” or cleaned to be as efficient as it should be. The control valve exerts some form of control in the system since the recharge process is designed to take place based on the amount of water processed. Each cubic foot of resin can efficiently eliminate calcium and magnesium minerals from about 3,200 gallons of hard water. By contrast, about 750mg of sodium is in turn added each water gallon. This sodium content is considered as low range. However, for people who are concerned about sodium intake in general, resins that release potassium is the best option – although it is expensive.

A Process Of A Brine Tank

In association with the mineral tank, a brine tank helps with the regeneration process. During the “brine cycle”, salty or brine water is pumped out from the brine tank into the mineral tank. As water passes through the plastic beads, sodium is exchanged with the ions in the hard water, regenerating the attraction of the plastic beads in the process. When the brine tank is empty, a “slow rinse process” begins, which is followed by a more forceful rinse. These two cycles allow fresh water to rinse excess salts from the mineral tank, expelling it down the drain before the brine tank is refilled.

After the washing away of the hard water ions and any excess sodium, the brine tank is refilled, returning the system back to service cycle to begin the water softening process again. Since the regeneration process allows for the dissolution of salt in the brine tank, it is important that salt is replenished from time to time.

Contact Us

At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need.  We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help!  For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.

 

Maintaining LINAC Systems with OEM Replacement Parts

Any electrical equipment that is repeatedly used will break down due to several reasons such as improper maintenance or lack thereof. They can also malfunction owing to poor electrical connections, overrunning the machine’s capability, having an untrained individual operate the equipment, including not replacing worn out parts when needed.

The Importance Of LINAC Parts

A linear accelerator (LINAC) is a very complex medical device that delivers high-energy X-rays to treat patients with cancer. Each component within a LINAC system is important, and all of them need to continually undergo rigorous, cleaning, testing, and maintenance to ensure optimal performance.

Linear accelerators Parts are very costly, and most LINAC owners often consider the option of buying a brand-new unit instead of paying for outrageously high repair parts costs, including maintenance and upkeep fees. Even though all LINAC parts have separate but vital functions, they are linked to each other and therefore, need to work in cohesion. Any breakdown of one of the parts can lead to a ripple effect that may render the whole system useless.

Cooling the LINAC Parts

The linear accelerator works by producing high energy particle beams, thus making the cooling system inclined to overheat. Depending on the model, most LINACs use a water cooling system that provides thermal stability to the system and allows the gantry and drive stand to operate at a constant temperature.

Today there are technologically advanced air-cooled chillers for LINAC cooling systems that are would probably cost more to replace a broken system. There are several independent oncology equipment refurbishing companies that have original equipment manufacturer (OEM) LINAC replacement parts, which even though they are also costly, however, once these LINAC parts are replaced, the system can continue to work like new.

The only concern when using such a complex and volatile piece of equipment is to maximize its uptime and minimizing on the overall total cost of ownership. Having said that, LINAC parts are available through the original equipment manufacturer (OEM) online or through a local dealer. The catch-22 is, do you go the economical way, such as scouring the local neighborhood depot to find the cheapest option that will work anyway, or do you stick with the original manufacturer’s LINAC parts?

Purchasing Replacement Parts

While the LINAC parts you find locally will probably serve you for a while until you can afford an OEM, but when it comes to quality, the materials will not be the same as the original. You can end up with a new replacement LINAC part that does not match up in the case of complicated parts and assemblies.

Maintaining LINAC systems with the original equipment manufacturer replacement parts also guarantee warranty coverage on each piece of equipment and in case the system fails, you can file a warranty claim provided the replacement parts that have been used match the manufacturer specifications. Using OEM LINAC parts also ensures the related components are compatible with the system, they are durable, and most importantly, they are reliable.

Learn more about Radparts and the variety of services and parts they offer to repair medical equipment including: linear accelerators parts, CT scanners parts, linac parts, and radiation oncology equipment at www.radparts.com.  To contact one of our medical equipment repair specialists for parts or service call toll free 877.704.3838 for 24/7/365 support.

 

Choosing a Medigap Plan, Enroll in Medigap

Have you just enrolled in Medicare? You may soon find out that not all costs are covered in the plan. Instead, you would be responsible for the costs not covered by the plan.

A Medigap plan is the perfect supplement for Medicare. In fact, you must have chosen original Medicare (parts A and B) to qualify to apply for a Medigap plan. Medigap (Medicare supplemental plan) plan fills some of the “gaps” and costs not covered by Medicare.

Medigap – The Choices

10 Medigap plans have been designed and they are identified by letters: A, B, C, D, F, G, K, L, M, or N. The letters are in no way a determining factor for how these plans function. However, plans A, B, K, L, M, and N have basically similar benefits while plans C, D, F, and G have same basic structures. You can find the unique benefits of these plans when you visit medicare.gov.

Who qualifies for a Medigap Plan?

Although you must have an original Medicare plan to be eligible for Medigap, not everyone is eligible. Individuals less than age 65 are not eligible in most states. A Medigap plan is a personal plan. For example, if you have purchased the plan because you are qualified, and you have a spouse that also qualifies, he or she must purchase a separate policy from yours.

Choosing a Medigap Plan

Medigap plans are regulated by state and federal laws. Generally, all plans with the same letters have the same basic benefits. However, states such as Wisconsin, Minnesota, and Massachusetts have policies that regulate the plans differently. Before you decide on the best Medigap plan, there are a few important factors you must consider.

What you can afford

Considering what you can afford means you would have to review the costs involved in the plan including coinsurance, deductible, and copayments. These plans should be reviewed in terms of the medical services you would most likely need and your budget. Most policies have low premiums with higher copayments or higher premiums with less expensive copayments. In reviewing the plans, you would be able to determine the best plan for your budget.

How much Coverage you need

Does your condition require regular medical care? Are you currently taking any management drugs? Did your healthcare provider recommend a treatment plan you must stick to for the next few months? Keeping all these in mind will help you choose a plan.

Provider’s policy

Medigap plan providers could charge based on two policies:

Community-rated policies: This policy costs every member of the group – referred to as community – the same amount regardless of the age of a member.

Issue-age rated policies: This policy is priced according to the age of the placer holder at the time of purchase. This policy does not increase over time as the individual ages.

Attained-age rated policies: This policy is priced according to the age of the policy holder at the time of purchase and could increase as the individual ages.

Choosing a Medigap plan is a complex endeavor that demands valuable amount of time, so you do not make mistakes. Ensure you are aware of the laws of your locality, stick to them, consider your medical needs, and consider your budget before you choose a plan.

Learn more about Medigap plans and rates at http://emedigap-plans.com.  Medigap Insurance brokers will help you compare Medigap Insurance rates and plans.  To talk to an expert in Medigap coverage call toll free 888-452-7949!

 

Ten Important Facts about Medicare Supplemental Insurance Plans

Are you a senior on Medicare? You probably know that the plan does not cover all the health insurance benefits you need. This is exactly where a Medical supplemental insurance plan becomes important. Also referred to as Medicare gap or Medigap coverage, it has a variety of benefits that supplements the costs that Medicare does not cover. Here are ten important facts about Medicare supplemental insurance plans.

Medicare supplemental plans are standardized

Medicare supplemental plans are standardized. This means that each plan that begins with the same letter (with designated letters A to N) must have the same basic benefits, irrespective of the insurance company you purchase the plan from. However, different insurance companies determine their pricing independently.

Medicare supplemental insurance plans cannot be combined with certain health insurance types

Medicare supplemental plans were designed to work with Original Medicare (parts A and B). If you have another type of insurance, purchasing a supplement plan from a supplement plan from an insurance company may be illegal.

Medicare Supplement plans do not cover all medical benefits

Benefits such as Part A and B deductible, Part B excess charges, skilled nursing facility care coinsurance, and foreign travel emergency are covered up to 50% by some Medicare supplement plans. On the other hand, benefits such as Medicare part A coinsurance, part A hospice care copayment or coinsurance, part B coinsurance or copayment, and the first three pints of blood are covered by supplement plans to at least 50% and it could be up 100%.

Medicare supplement plan is best bought when you are first eligible

Although Medicare supplement plan can be bought anytime, you could be subjected to medical underwriting which would allow insurance companies gather information about your medical history. This history – past or present – could be used as grounds to either charge you more for a plan or reject your application. The Medicare Supplement Open Enrollment Period is the best time for purchasing a supplement plan. During this time, you would not be subjected to a medical underwriting by insurance companies. This period lasts for six months beginning from when you are 65 or older.

You must leave your insurance plan to enjoy a Medicare Supplemental plan

If you already have another insurance plan such as a Medicare Advantage plan, you must leave the plan before the Medicare supplemental plan begins.

A Medicare supplement plan is for one person

If a holder has a spouse that qualifies for a Medicare supplement plan, he/she will have to purchase a separate policy.

Consumers pay a premium

Medicare supplemental insurance plan consumers pay the insurance company a monthly premium for the policy. This is in addition to the Part B premium that a policy holder must pay to Medicare.

Medicare Supplement plans no longer cover prescription drugs

In the past, Medicare supplemental plans had prescription drug coverage. However, since January 1, 2006, such coverage has been disallowed. For consumers who need such coverage, they can purchase the stand-alone Part D also referred to as Medicare Prescription Drug Plan.

It is illegal anyone with an MSA to sell a Medicare supplemental plan

If anyone has a Medicare Medical Savings Account (MSA) Plan, it is illegal to sell a Medicare supplemental plan to a consumer.

Medicare Supplemental Plans are guaranteed renewable

So long as a consumer continues to pay the premium, no insurance company can cancel a Medicare supplemental policy even if the consumer has medical issues.

Learn more about Medicare Supplemental Insurance plans, rates and more at http://www.emedicare-supplemental-insurance.com.  Medicare Supplemental Insurance brokers will help you compare Medicare Supplemental Insurance rates and plans.  To talk to an expert in Medicare coverage toll free 877-202-9248 today!